Screw on the MINIFLAM OXYGEN canister clockwise unto the valve insert located below the blue knob making sure not to cross thread the fittings. If the tread does not engage, back off a quarter of a turn and try again. Treading should be easy with the least resistance.
It is normal that you may briefly hear the sound of oxygen escaping towards the end of this procedure. Continue to tread until snug. Do not over tighten or force.
Before Installing the Oxygen Canister, make sure that the OXYGEN valve is closed. (To close turn blue knobs clockwise).
Copyright © Miniflam LLC 2012 - 2014, All Rights Reserved