Screw on the MINIFLAM GP40 Vapor Gas or the "S II" Rechargeable Gas Canister clockwise into the gas connection located at the orange knob valve making sure not to cross-thread the brass fitting. If the tread does not engage, back off a quarter of a turn and try again. Treading should be easy with the least resistance.
If you hear or smell gas escaping from your torch, check to make sure the gas valve is in the closed position. Continue to tread all the way until snug. DO NOT OVER-TIGHTEN!
Before starting this procedure, make sure that both GAS and OXYGEN valves are closed. (To close turn both orange and blue knobs clockwise).
Copyright © Miniflam LLC 2012 - 2014, All Rights Reserved